
93
SAM7S Series [DATASHEET]
6175M–ATARM–26-Oct-12
16.4.2
Watchdog Timer Mode Register
Register Name:
WDT_MR
Access Type:
Read-write Once
WDV: Watchdog Counter Value
Defines the value loaded in the 12-bit Watchdog Counter.
WDFIEN: Watchdog Fault Interrupt Enable
0: A Watchdog fault (underflow or error) has no effect on interrupt.
1: A Watchdog fault (underflow or error) asserts interrupt.
WDRSTEN: Watchdog Reset Enable
0: A Watchdog fault (underflow or error) has no effect on the resets.
1: A Watchdog fault (underflow or error) triggers a Watchdog reset.
WDRPROC: Watchdog Reset Processor
0: If WDRSTEN is 1, a Watchdog fault (underflow or error) activates all resets.
1: If WDRSTEN is 1, a Watchdog fault (underflow or error) activates the processor reset.
WDD: Watchdog Delta Value
Defines the permitted range for reloading the Watchdog Timer.
If the Watchdog Timer value is less than or equal to WDD, writing WDT_CR with WDRSTT = 1 restarts the timer.
If the Watchdog Timer value is greater than WDD, writing WDT_CR with WDRSTT = 1 causes a Watchdog error.
WDDBGHLT: Watchdog Debug Halt
0: The Watchdog runs when the processor is in debug state.
1: The Watchdog stops when the processor is in debug state.
WDIDLEHLT: Watchdog Idle Halt
0: The Watchdog runs when the system is in idle mode.
1: The Watchdog stops when the system is in idle state.
WDDIS: Watchdog Disable
0: Enables the Watchdog Timer.
1: Disables the Watchdog Timer.
31
30
29
28
27
26
25
24
–
WDIDLEHLT
WDDBGHLT
WDD
23
22
21
20
19
18
17
16
WDD
15
14
13
12
11
10
9
8
WDDIS
WDRPROC
WDRSTEN
WDFIEN
WDV
76543210
WDV